Choose a different country or region to view content for your location

WIDOCRYL-Topsiegel PM

Balconies, terraces, walkways

WIDOCRYL-Topsiegel PM is used as decorative topping on surfaces. It may be used on waterproofings, primings and wearing layers from Widopan. WIDOCRYL-Topsiegel PM is based on methyl methacrylate resin. The surface to be sealed must be dry, clean and free from grease and dust.

Flat roofs

WIDOCRYL-Topsiegel PM may also be used as decoration of surface seals of WIDOPAN-FD.

Please refer to our technical information sheets!

WIDOCRYL-Topsiegel PM

Basis
Methyl methacrylate resin

Curing with hardener (at + 20°C)
Rainproof after 30 min., Walkable after 60 min.

Consumption
Approx. 500 - 700 g/m²

Basic colours
Window grey, light grey, pebble grey, ivory, light ivory, beige, oxide red (special colours on request)

Packaging unit
10,00 kg, 5,00 kg

Min. working temperature
-5°C

Temperature resistance
-30°C to +80°C

Cleaning in fresh condition
WIDOPAN-Cleaner

Storage
If container is kept closed and storage temperature held constantly below +20°C, the product may be used for up to 6 months.

Parking deck

WIDOCRYL-Topsiegel PM is used on parking decks and traffic areas to seal the wearing layer. Loose chippings must be removed before the Topsiegel PM is applied. Please check with our application engineering team for details on application and amounts required in each specific case.

Mixing

WIDOCRYL-Topsiegel PM must be carefully stirred before adding the hardener. Because of the short working time, only fairly small amounts should be mixed with hardener.

The required amount of hardener depends on the temperature. For details see container lid.

Further details, especially regarding hazard statements, security advices and measures in the event of fire can be found in the safety data sheet under sections 2, 4, 5, 6, 7 and 8.

Please also refer to our technical information sheets!

Download pdf